Those Missouri Ignition Interlock Violations Will Cost You

missouri-ignition-interlock-violations-cost-youThe Missouri ignition interlock program is committed to keeping drunk drivers from making another intoxicated mistake. Unfortunately, not all DWI drivers are as committed to safe driving, even with an interlock device. Instead, they risk Missouri ignition interlock violations for trying to get out of their court- or DMV-ordered requirement. The penalties and consequences for those violations just show how much Missouri wants you to get done with your device and be a safer driver once it is removed.

Risking Missouri ignition interlock violations means that you may have:

  • Violated the Missouri ignition interlock laws by not using the device installed on your vehicle. Either you used another vehicle you owned that was not equipped with the device or you borrowed someone’s vehicle.
  • In some cases, refusing a test may happen during a rolling retest, or while the vehicle is being driven. If this was unintentional, you should have an opportunity to test once you are out of traffic. Not testing once you are in a safe place will then be considered a violation.
  • You blew a test result that was over the pre-set limit, indicating you have been drinking and attempted to drive.
  • Missing a service appointment is one of the Missouri ignition interlock violations

In most cases, these violations will add a mandatory six-month extension of the interlock requirement onto your current court order. In other cases, you could be removed from your interlock program or even face jail time. If your BAC is reportable, then you could face additional drunk driving charges and the penalties for those.

Remember that despite the influence of alcohol, you made a choice to drive while intoxicated. With an ignition interlock device, you face similar choices when you start your vehicle. Risking Missouri ignition interlock violations is more hassle than it is worth, and discovering that the hard way should never be a part of your recovery after a DWI.

Tough Times and Mississippi Ignition Interlock Violations

mississippi ignition interlock violationsWhen you have a Mississippi ignition interlock device, you’ve been given back your independence and freedom to drive… as long as you do so while sober. For any drunk driving conviction, you will likely have an interlock for some time, which is a good thing. You do not have to depend on others for transportation, and you can keep your job and other obligations in check. The thing you want to make sure you stay away from are any Mississippi ignition interlock violations.

Mississippi ignition interlock violations include:

  • Asking another person to blow into your ignition interlock to start your vehicle, or during a rolling retest.
  • Attempting to tamper with or circumvent the ignition interlock device.
  • Not installing the device as ordered by the court.
  • Blowing off any service or calibration appointments.

Any Mississippi ignition interlock violations will cause the offender additional consequences, including a fine between $250 – $1,000 and a possible jail sentence of up to one year, or both.

Other violations with a Mississippi interlock include blood alcohol concentration (BAC) violations. Simply stated, the device is set to detect any amount of alcohol in the bloodstream, just like a police breathalyzer. Even a trace amount can be recorded and stored in the data, but it is the BAC that exceeds the set limit that can be the biggest problem. Most interlocks are set to disable an ignition system between .02-.03 percent BAC, or around the same amount of alcohol in one standard drink. If you fail your test due to a BAC reading, you’ll face additional time with the interlock device or removal from the program entirely.

Keeping your freedom to drive is the idea behind the interlock. Otherwise, you’d just be back to bumming rides from friends after a Mississippi DUI. Don’t let those violations cost you your freedom. Stay sober and let your interlock do its job, so you can keep doing yours.

Use It or Lose It: Texas Ignition Interlock Violations

texas ignition interlock violationBlood alcohol concentration (BAC) is not only what legally defines a DWI in Texas (and across the U.S.) but it is also what is measured by ignition interlock devices after a DWI conviction. Failing a BAC test is a Texas ignition interlock violation and a big obstacle in resuming life as normal. Texas law has specific penalties for those ignition interlock violations, all of which ensure that the roads are kept safe from future drunk driving incidents.

Ignition interlock devices prevent 67-90% of subsequent drunk driving incidents, but only when they are used.

Depending on the circumstances of the drunk driving incident, a Texas DWI offender was given the choice (or required) to install an interlock by the court or through the DMV (or both). Texas ignition interlock violations become much less understandable given that there is once again a choice being made by the offender: whether to drive sober or attempt to get around the system and/or device.

Texas ignition interlock violations include tampering with the device, asking another person to blow into the interlock, driving a vehicle that does not have an interlock installed, or registering a BAC above the preset limit.

Penalties for any of those Texas ignition interlock violations include:

  • Revoking the interlock privilege and restricted driver’s license completely.
  • Ordering the offender to wear a Secure Remote Alcohol Monitoring (SCRAM) bracelet.
  • Disallowing any participation in interlock or probation programs, and instead enforcing a jail sentence.

If you are an offender who uses your Texas ignition interlock device as instructed and has no problems with failing the ignition interlock test, you’ll be ahead of the curve in no time. Risking Texas ignition interlock device violations is never worth the restrictions that quickly follow as a result of those actions. Just drive sober and do your part in showing your commitment to safety.

Oh No! New Mexico Ignition Interlock Violations!

new mexico ignition interlock violationWell, that was unexpected… or was it? You just blew into your New Mexico ignition interlock only to receive a failed test or interlock violation notification. You swear you weren’t drinking, or maybe that you thought enough time had passed since you finished off that beer. But there it is, blinking at you, and now you will have to blow a clean breath sample or face the consequences for your interlock violation.

A New Mexico Ignition Interlock test failure or violation can be caused by:

  • A BAC (blood alcohol concentration) sample above the pre-set limit.
  • Residual alcohol in the mouth from mouthwash or medications.
  • Other sugary foods, drinks, or other substances (gum, mints) in the mouth.
  • Trying to circumvent or tamper with the device.
  • Driving another vehicle that does not have an interlock installed.

New Mexico ignition interlock violations will cause additional consequences, like a longer time requirement with the device. In the case of multiple interlock violations, you could be removed from the program completely. If your device shows that you tried to start your vehicle with a high blood alcohol concentration (BAC) you could face other consequences like court costs, fines or even incarceration. You may also be charged with an additional DWI as a result of your violations.

Compliance with your New Mexico ignition interlock requirement is the only way to ensure you will have a trouble-free road to recovery after your DWI. The easiest way to get through the time required by the court is to never attempt to drive if you have been drinking. Instead, look at that time as your chance to renew your commitment to sober driving, and being a role model for those around you. New Mexico expects nothing but the best behavior from you so that you can move on with your life after a DWI.

Got Maryland Ignition Interlock Device Violations?

Maryland ignition interlock violations2016 was a big year for Maryland ignition interlock law. The state expanded interlock access for all DWI offenders, even if it was a first-time incident. That shows how reliable the devices are, and why it is so important to make sure you don’t have any test failures or violations. That and the big consequences you face for those violations and failures.

Every month you are required to have your Maryland ignition interlock device calibrated by your service provider. The data that your device records is transmitted to your program supervisor or probation officer, and then onto the court. That data shows:

  • Your breath alcohol concentration (BAC) for every startup and rolling retest.
  • Any attempts to tamper with or circumvent the device.
  • How many times you used the device, in case your pattern of driving indicates that you are driving another vehicle without an interlock installed.

Any Maryland ignition interlock test failures that result from your BAC are considered violations in the program. Each BAC violation increases the time you are required to have the device by one month. If you incur four BAC violations with your device, you’ll be removed from the program and your driver’s license will be suspended. You will not have your license restored until you serve out the original suspension time associated with your DWI, so there will be no reduction of the suspension period, even if you were a month away from having your device removed compliantly.

None of that is worth the hassle when you can just continue to drive sober and remain committed to your DWI recovery. Considering how you ended up with an ignition interlock in the first place, avoiding test failures shouldn’t be difficult, and once you’ve mastered how to use the device, the rest is just a matter of time before you regain all of your freedom back.